HA-RO basic 120 EDI
The HA-RO Basic 120 EDI with integrated electrodeionization (EDI) controls the entire water treatment. The compact ready-to-connect reverse osmosis system is completely wired to a stainless steel frame and can accommodate individual components. A subsequent increase in capacity is therefore possible. Another feature is the automatic transition to the last operating state after a power failure. The controller is used for fully automatic monitoring and control of the complete pure water treatment including the periphery.
Technical specification of the controller:
>> Ready-to-connect reverse osmosis -EDI system
>> Stainless steel frame for holding the individual components
>> Fully wired to control the entire water treatment
>> Subsequent capacity increase up to 400l /h possible
- Ready-to-connect reverse osmosis system
- Stainless steel frame to hold the individual components
- Fully wired to control the entire water treatment
- Subsequent capacity increase up to 400l/h possible
- Digital conductivity and temperature measurement
- Digital flow measurement of concentrate, permeate and diluate
- Automatic transition to the last operating state after a power failure
- Fault display for feed water pressure
- Cyclical flushing device to protect against germs during standstill
- Digital control "ECO" for fully automatic monitoring and control of the complete pure water treatment
- optional PLC control "PREMIUM" with 10" touch control panel for controlling the peripherals
- Connections: RS 232 interface, connections for external command devices; optional WLAN and network connections, 4 USB ports
- Electrical Connection: 200–240V/50Hz
- Connected Load: 0,55 kW
- RO Real Output (at 10°C): 120 ltr/h
- Work Pressure: up to 14 bar
- permissible Ambient Temperature min./max.: +2°C / +40°C
- Raw Water Pressure: 2-6 bar
- Raw Water Conditioning: Softened Drinking Water (0,1°dH)
- pH-Range: 4- 11
- Colloid Index: max. 3
- Membrane Retention Rate: 99% Salts; >99% Germs, Bacteria
- WCF rate: up to 75% adjustable
- Connection Voltage: 230V/50Hz
- Connected Load: 0,3 kW
- Ambient Temperature: 5-40°C
- Water Temperature: 5-35°C
- Inlet Pressure: 1-4bar
- max. Pure Water Back Pressure: 0-1bar
- max. Input Conductivity: 4-30µS/cm
- Feed-in Amount: 120ltr/h
- EDI Output: 100ltr/h
- Amount of Brine: 22ltr/h
- Residual Conductivity: 0,06 – 1,0 µS/cm
- Typ. Conductivity: 0,1 µS/cm
- TOC-Value: < 10 ppb
- Germ Reduction: > 99 %
- Connection Input: DN20
- Connection Output: DN20
- Connection Brine: DN10
- Dimensions (WxDxH): 800 x 650 x 1750 mm
- Manufacturer: Hartmann
- Type: HA-RO basic 120 EDI