HA-RO complete EDI

Bild HA-RO complete EDI - VE-Wasseraufbereitungsanlage

The HA-RO complete EDI is a high-quality VE water treatment system in a completely closed, low-noise cabinet design. The reverse osmosis EDI method ensures water qualities according to ASTM Type II and Type III as well as DIN EN 285 and DIN ISO 15883. The pure water quality is below 1 µS/cm. The vibration-damped system control cabinet with a central control unit (10" touch display) enables intuitive operation of the system with a minimum noise level.

The measured values ​​are processed completely via the SPS, so that separate field regulation and control devices for level, conductivity, temperature, pressure and UV intensity are no longer required are. Another highlight is the high-quality pump station for ring mains. Due to the space-saving construction and the sophisticated design, this compact system can be integrated into any laboratory environment.

>> EDI diluate output: 60 l/h - 440 l/h
>> Pure water quality: < 1 µS/cm
>> W/D/H: 1000/600/1900


  1. Ready-to-connect deionized water treatment system – Plug&Treat
  2. Fully equipped closet system
  3. compact, high-quality deionized water treatment as an EDI system
  4. Completely closed, low-noise cabinet system
  5. Visualization, operation and dilution via PLC with touch panel
  6. all necessary pre-treatment and post-treatment components integrated
  7. Connection to control technology possible
  8. Electrical and control expansion up to complete building supply with deionized water
  9. Measured value processing completely via PLC
  10. all measuring points can be calibrated and adjusted
  11. all conductivity displays are temperature-compensated
  12. horizontal non-wearing stainless steel inline high-pressure pump
  13. high-quality electrical and hydraulic brand components
  1. Quality-controlled double softening in a counter-current process with chlorine electrolysis
  2. soft water monitoring
  3. Salt deficiency alarm
  4. Storage tank with sloping bottom
  5. electrodeionization
  6. UV disinfection with recirculation
  7. sterile filtration
  1. Diluate Output: 60 l/h- 440 l/h
  2. Ultra Pure Water Quality: < 1 μS/cm (depending on the Raw Water Quality)
  3. Double Softener: 2 x 60 m³/°dH
  4. Brine Tank: 50 l
  5. Tank Volume (internal): 80 l
  6. RO-Fine Filter: 10“ or 20“
  7. Water inlet: DN 25
  8. Water outlet: DN 25
  9. Drain: DN 50
  10. Connection Voltage: 230 V/50 Hz
  11. Raw Water Pressure: 3,0 - 6,0 bar
  12. Raw Water Quality: 5°C - 25°C
  13. Ambient Temperature: 5°C - 30°C
  14. Dimensions in mm (W x D x H): 1000 x 600 x 1900
  15. Weight: approx. 450 kg, depending on the Version

Request more information about our HA-RO complete EDI

All fields marked with * are required for further processing of your request and must be filled out.

I agree that my details from the contact form will be collected and processed to answer my request. The data will be deleted after your request has been processed. You can revoke your consent at any time for the future by sending an email to info@hartmann-gmbh.eu. Detailed information on handling user data can be found in our Privacy Policy.

Please add 2 and 3.

Go back