The compact, ready-to-connect HA-RO modular EDI with electrodeionization controls your complete deionized water treatment. The reverse osmosis system is completely wired on a stainless steel frame and can therefore also be retrofitted individual components. Another feature is the automatic transition to the last operating state after a power failure. The digital control is used for the fully automatic monitoring and control of the complete pure water treatment with peripherals.
Implementation:
- Compact frame system
- 1 x 20" pre-filtration 5 µm + activated carbon
- RO membrane incl. pressure pipe
- 1 x high-pressure centrifugal pump, 400 V
- 2 x flow meter
- 1 x Complete connection fittings including internal piping
- 1 x central control
HA-RO modular EDI
- Ready-to-connect reverse osmosis system
- Fully wired to control the entire water treatment
- Stainless steel frame to hold the individual components
- Subsequent increase in capacity possible
- Digital conductivity and temperature measurement
- Flow measurement of concentrate, permeate, pure water
- Automatic restart after power failure
- Fault display for feed water pressure
- Schematic display of all operating processes and measured values on the graphic display
- Cyclical flushing device to protect against germs during standstill
- Digital control for fully automatic monitoring and control of the complete pure water treatment
- UV reactors
- Ion Exchanger
- Ring Surveillance
- Integrated, individually adjustable limit value monitoring of conductivity and temperature limit values of feed water, permeate, pure water and ring circulation quality
- Flow monitoring for permeate, concentrate, pure water, concentrate EDI and ring circulation at the end of the ring
- LAN connection, connections for external command devices
- Connection Load: 4,4 - 5,8 kW
- EDI-Diluate output: 270 l/h to 1800 l/h
- Work Pressure: Bis 14 bar
- permissible Feed Water Temperature: min./max. +5°C / +25°C
- permissible Ambient Temperature: min./max. +5°C / +30°C
- Feed Water Pressure: 4-6 bar
- Desalination rate: 99%
- WCF rate: max. 75%
- Dimensions (WxDxH): 1500/2350 x 750/900 x 1800 mm
Request more information about our HA-RO modular EDI
We offer the HA-RO modular EDI system in different performance levels individually according to your requirements.
Just talk to us!
On request, we can also manufacture these systems according to your special requirements, so that other performance levels are also possible.
Choose from the following performance sizes:
HA-RO modular EDI 600
The HA-RO modular EDI 600 is a high-quality deionized water treatment system. The reverse osmosis process achieves water qualities in accordance with ASTM Type II and Type III as well as DIN EN 285 and DIN ISO 15883. The ultrapure water quality is 5 - 15 µS/cm. PLC control (10" touch display) enables intuitive operation of the system. The processing of the measured values runs completely via the PLC, so that separate field regulation and control devices for level, conductivity, temperature, pressure and UV intensity are no longer required. Another The highlight is the high-quality and clearly structured PP piping, which creates a piping system tailored to the user with minimal dead space. This compact system can be integrated into any laboratory environment due to its space-saving design.
>> EDI diluate output: 600 l/h
>> W/D/H: 800/600/1800 mm
- compact, high-quality deionized water treatment as an EDI system
- Stainless steel frame construction
- Visualization, operation and dilution via PLC with touch panel
- Connection to control technology possible
- Electrical and control expansion up to complete building supply with deionized water
- Measured value processing completely via PLC
- all measuring points can be calibrated and adjusted
- all conductivity displays are temperature-compensated
- vertical wear-free stainless steel inline high-pressure pump, high-pressure piping in stainless steel
- high-quality electrical and hydraulic brand components
- genuine modular system, upgrades are easily possible at any time
- Flow meters for EDI wastewater as standard
- Hardness Monitoring
- EDI Bridging
- Membrane Degassing
- UV Reactors
- Ion Exchanger
- Pump station for Ring Line
- Diluate Output: 600 l/h
- Ultrapure Water Quality: < 1 μS/cm (depending on the Raw Water Quality)
- RO Fine Filter (One- or Two Stage): 20“
- Water Inlet: DN 20
- Water Outlet: DN 13
- Connection Voltage: 400 V/50 Hz
- Raw Water Pressure: 3,0 - 6,0 bar
- Raw Water Temperature: 10°C - 25°C
- Ambient Temperature: 5°C - 30°C
- Dimensions in mm (W x D x H): 800 x 600 x 1800
Request more Information about our HA-RO modular 600 EDI
HA-RO modular EDI 900
The HA-RO modular EDI 900 is a high-quality deionized water treatment system. The reverse osmosis process achieves water qualities in accordance with ASTM Type II and Type III as well as DIN EN 285 and DIN ISO 15883. The ultrapure water quality is 5 - 15 µS/cm. PLC control (10" touch display) enables intuitive operation of the system. The processing of the measured values runs completely via the PLC, so that separate field regulation and control devices for level, conductivity, temperature, pressure and UV intensity are no longer required. Another The highlight is the high-quality and clearly structured PP piping, which creates a piping system tailored to the user with minimal dead space. This compact system can be integrated into any laboratory environment due to its space-saving design.
>> EDI diluate output: 900 l/h
>> W/D/H: 800/600/1800 mm
- compact, high-quality deionized water treatment as an EDI system
- Stainless steel frame construction
- Visualization, operation and dilution via PLC with touch panel
- Connection to control technology possible
- Electrical and control expansion up to complete building supply with deionized water
- Measured value processing completely via PLC
- all measuring points can be calibrated and adjusted
- all conductivity displays are temperature-compensated
- vertical wear-free stainless steel inline high-pressure pump, high-pressure piping in stainless steel
- high-quality electrical and hydraulic brand components
- genuine modular system, upgrades are easily possible at any time
- Flow meters for EDI wastewater as standard
- Hardness Monitoring
- EDI Bridging
- Membrane Degassing
- UV Reactors
- Ion Exchanger
- Pump station for Ring Line
- Diluate Output: 900 l/h
- Ultrapure Water Quality: < 1 μS/cm (depending on the Raw Water Quality)
- RO Fine Filter (One- or Two Stage): 20“
- Water Inlet: DN 20
- Water Outlet: DN 13
- Connection Voltage: 400 V/50 Hz
- Raw Water Pressure: 3,0 - 6,0 bar
- Raw Water Temperature: 10°C - 25°C
- Ambient Temperature: 5°C - 30°C
- Dimensions in mm (W x D x H): 800 x 600 x 1800
Request more Information about our HA-RO modular 900 EDI
HA-RO modular EDI 1200
The HA-RO modular EDI 1200 is a high-quality deionized water treatment system. The reverse osmosis process achieves water qualities in accordance with ASTM Type II and Type III as well as DIN EN 285 and DIN ISO 15883. The ultrapure water quality is 5 - 15 µS/cm. PLC control (10" touch display) enables intuitive operation of the system. The processing of the measured values runs completely via the PLC, so that separate field regulation and control devices for level, conductivity, temperature, pressure and UV intensity are no longer required. Another The highlight is the high-quality and clearly structured PP piping, which creates a piping system tailored to the user with minimal dead space. This compact system can be integrated into any laboratory environment due to its space-saving design.
>> EDI diluate capacity: 1200 l/h
>> W/D/H: 800/600/1800 mm
- compact, high-quality deionized water treatment as an EDI system
- Stainless steel frame construction
- Visualization, operation and dilution via PLC with touch panel
- Connection to control technology possible
- Electrical and control expansion up to complete building supply with deionized water
- Measured value processing completely via PLC
- all measuring points can be calibrated and adjusted
- all conductivity displays are temperature-compensated
- vertical wear-free stainless steel inline high-pressure pump, high-pressure piping in stainless steel
- high-quality electrical and hydraulic brand components
- genuine modular system, upgrades are easily possible at any time
- Flow meters for EDI wastewater as standard
- Hardness Monitoring
- EDI Bridging
- Membrane Degassing
- UV Reactors
- Ion Exchanger
- Pump station for Ring Line
- Diluate Output: 1200 l/h
- Ultrapure Water Quality: < 1 μS/cm (depending on the Raw Water Quality)
- RO Fine Filter (One- or Two Stage): 20“
- Water Inlet: DN 20
- Water Outlet: DN 13
- Connection Voltage: 400 V/50 Hz
- Raw Water Pressure: 3,0 - 6,0 bar
- Raw Water Temperature: 10°C - 25°C
- Ambient Temperature: 5°C - 30°C
- Dimensions in mm (W x D x H): 800 x 600 x 1800
Request more Information about our HA-RO modular 1200 EDI
HA-RO modular EDI 1500
The HA-RO modular EDI 1500 is a high-quality deionized water treatment system. The reverse osmosis process achieves water qualities in accordance with ASTM Type II and Type III as well as DIN EN 285 and DIN ISO 15883. The ultrapure water quality is 5 - 15 µS/cm. PLC control (10" touch display) enables intuitive operation of the system. The processing of the measured values runs completely via the PLC, so that separate field regulation and control devices for level, conductivity, temperature, pressure and UV intensity are no longer required. Another The highlight is the high-quality and clearly structured PP piping, which creates a piping system tailored to the user with minimal dead space. This compact system can be integrated into any laboratory environment due to its space-saving design.
>> EDI diluate capacity: 1500 l/h
>> W/D/H: 800/600/1800 mm
- compact, high-quality deionized water treatment as an EDI system
- Stainless steel frame construction
- Visualization, operation and dilution via PLC with touch panel
- Connection to control technology possible
- Electrical and control expansion up to complete building supply with deionized water
- Measured value processing completely via PLC
- all measuring points can be calibrated and adjusted
- all conductivity displays are temperature-compensated
- vertical wear-free stainless steel inline high-pressure pump, high-pressure piping in stainless steel
- high-quality electrical and hydraulic brand components
- genuine modular system, upgrades are easily possible at any time
- Flow meters for EDI wastewater as standard
- Hardness Monitoring
- EDI Bridging
- Membrane Degassing
- UV Reactors
- Ion Exchanger
- Pump station for Ring Line
- Diluate Output: 1500 l/h
- Ultrapure Water Quality: < 1 μS/cm (depending on the Raw Water Quality)
- RO Fine Filter (One- or Two Stage): 20“
- Water Inlet: DN 20
- Water Outlet: DN 13
- Connection Voltage: 400 V/50 Hz
- Raw Water Pressure: 3,0 - 6,0 bar
- Raw Water Temperature: 10°C - 25°C
- Ambient Temperature: 5°C - 30°C
- Dimensions in mm (W x D x H): 800 x 600 x 1800
Request more Information about our HA-RO modular 1500 EDI
HA-RO modular EDI 1800
The HA-RO modular EDI 1800 is a high-quality deionized water treatment system. The reverse osmosis process achieves water qualities in accordance with ASTM Type II and Type III as well as DIN EN 285 and DIN ISO 15883. The ultrapure water quality is 5 - 15 µS/cm. PLC control (10" touch display) enables intuitive operation of the system. The processing of the measured values runs completely via the PLC, so that separate field regulation and control devices for level, conductivity, temperature, pressure and UV intensity are no longer required. Another The highlight is the high-quality and clearly structured PP piping, which creates a piping system tailored to the user with minimal dead space. This compact system can be integrated into any laboratory environment due to its space-saving design.
>> EDI diluate capacity: 1800 l/h
>> W/D/H: 800/600/1800 mm
- compact, high-quality deionized water treatment as an EDI system
- Stainless steel frame construction
- Visualization, operation and dilution via PLC with touch panel
- Connection to control technology possible
- Electrical and control expansion up to complete building supply with deionized water
- Measured value processing completely via PLC
- all measuring points can be calibrated and adjusted
- all conductivity displays are temperature-compensated
- vertical wear-free stainless steel inline high-pressure pump, high-pressure piping in stainless steel
- high-quality electrical and hydraulic brand components
- genuine modular system, upgrades are easily possible at any time
- Flow meters for EDI wastewater as standard
- Hardness Monitoring
- EDI Bridging
- Membrane Degassing
- UV Reactors
- Ion Exchanger
- Pump station for Ring Line
- Diluate Output: 1800 l/h
- Ultrapure Water Quality: < 1 μS/cm (depending on the Raw Water Quality)
- RO Fine Filter (One- or Two Stage): 20“
- Water Inlet: DN 20
- Water Outlet: DN 13
- Connection Voltage: 400 V/50 Hz
- Raw Water Pressure: 3,0 - 6,0 bar
- Raw Water Temperature: 10°C - 25°C
- Ambient Temperature: 5°C - 30°C
- Dimensions in mm (W x D x H): 800 x 600 x 1800
Request more Information about our HA-RO modular 1800 EDI
HA-RO modular EDI 3000
The HA-RO modular EDI 3000 is a high-quality VE water treatment system. The reverse osmosis process achieves water qualities in accordance with ASTM Type II and Type III as well as DIN EN 285 and DIN ISO 15883. The pure water quality is 5 - 15 µS/cm. PLC control (10" touch display) enables intuitive operation of the system.
The measured value is processed completely via the SPS, so that separate field regulation and control devices for level, conductivity, temperature, pressure and UV intensity are no longer required. The membrane element installed here is twice as thick as that of the smaller models of the HA-RO modular EDI.
Another highlight is the high-quality and clearly structured PP piping, which creates a piping with few dead spaces tailored to the user. Due to the space-saving design, this compact system can be integrated into any laboratory environment.
>> EDI diluate output: 2700 l/h
>> W/D/H:[ nbsp]2400/900/1850 mm
- compact, high-quality deionized water treatment as an EDI system
- Stainless steel frame construction
- Visualization, operation and dilution via PLC with touch panel
- Connection to control technology possible
- Electrical and control expansion up to complete building supply with deionized water
- Measured value processing completely via PLC
- all measuring points can be calibrated and adjusted
- all conductivity displays are temperature-compensated
- vertical wear-free stainless steel inline high-pressure pump, high-pressure piping in stainless steel
- high-quality electrical and hydraulic brand components
- genuine modular system, upgrades are easily possible at any time
- Flow meters for EDI wastewater as standard
- Hardness Monitoring
- EDI Bridging
- Membrane Degassing
- UV Reactors
- Ion Exchanger
- Pump station for Ring Line
- Real Output: 2700 l/h
- Ultrapure Water Quality: < 1 μS/cm (depending on the Raw Water Quality)
- RO Fine Filter (One- or Two Stage): 20“
- Water Inlet: DN 40
- Water Outlet: DN 25
- Connection Voltage: 400 V/50 Hz
- Raw Water Pressure: 3,0 - 6,0 bar
- Raw Water Temperature: 10°C - 25°C
- Ambient Temperature: 5°C - 30°C
- Dimensions in mm (W x D x H): 2400 x 900 x 1850
