AquaRO² Water Treatment

Pure and Ultrapure Water straight from the tap

The AquaRO² systems produce pure water in three different quality levels from tap water. The AquaRO², AquaRO² DI and EDI² series produce deionized water using a reverse osmosis module. The EDI² series further processes the DI water into type II water with the help of an EDI cell. The pure water produced is then stored in an optionally available external storage tank (35 l, 70 l or individual size). Depending on the version, the production rates are between 8 l/h and 40 l/h.

Configurations and Operation

The production rates from 8 l/h to 40 l/h are available in three different degrees of purity (10 µS/cm to 0.2 µS/cm) depending on the configuration. The device is conveniently operated via a color touchscreen, on which recorded data and Warning messages are clearly displayed.

Diagnostics and Maintenance

Thanks to the integrated self-diagnosis module, service times and costs reduced. With the help of the maintenance tool integrated into the software, the customer can easily maintain it himself.

Housing

The specially designed housing contains all components. Only the side panel needs to be removed to carry out maintenance work. This service access allows easy access to the ultra clean module and the UV lamp.

Conditioning, reverse osmosis and EDI module

The integrated modules for pretreatment, conditioning₁, reverse osmosis₁ and EDI₁ produce deionized water or pure water at a production rate of 8 l/h to 40 l/h ( depending on the configuration) from the supplied tap water.

Optional storage tank for AquaRO₂ and EDI₂

The produced pure water or deionized water (DI water) can be temporarily stored in an optional storage tank will. The storage tank is 35 L or 70 L, depending on customer requirements . Individual sizes are also possible.

Easy operation and support by software tools

Control and display of data and warnings via color touch screen ● self-diagnostic module and Maintenance tool easy to operate via touchscreen

Space-saving thanks to wall mounting

If you order the wall-mounted configuration, you mount the entire system to the wall, saving valuable desk space.

Space-saving through table integration (BI version)

This configuration also saves valuable desk space as the actual system is installed under the desk. Only the display and the dispenser are mounted on the wall.

₁...not in all series

Feed Water Requirements:

Type: Tap Water
Conductivity: < 1400 μS/cm
Inset Pressure: 1,5 bis 6 bar
Free Chlorine: < 0,1 mg/l
Silt Density Inde: (SDI): <3
pH-Value: 3-9
Temperature: 5 bis 25 °C

Device Specifications:

Dimensions Device W x H x D: 504 x 535 x 680 mm
Power Connection: 110-230 V/50 Hz
Dosing Flow: 2,0 l/min (1,5 l/min*)
Productivity Rate: 10 l/h, optional 20 l/h
UV Lamp: 185 nm / 254 nm
Final Filter: Capsule 0,2 µm
Pretreatment Module ProPak R10
Conditioning Module P
Ultrapure Module MemPak
Ultrafiltration Module

* mit Life-Science-Modell

Device-Configurations:

Model:

AquaRO²

AquaRO² DI

AquaRO² P10 | P10 DI

EDI²

Pure Water Quality:

< 10 μS/cm

< 1 μS/cm; Typ II

< 10 μS/cm | 1 µS/cm

< 0,2 μS/cm; Typ II

Resistance:

> 0,1 MΩ x cm

> 1 MΩ x cm

> 0,1 MΩ x cm | 1 MΩ x cm

> 5 MΩ x cm

Total organic Carbon (TOC):

< 50 pbb

< 40 pbb

< 20 pbb

Productivity:

8 l/h to 40 l/h

8 l/h to 20 l/h

8 l/h

10 l/h to 40 l/h

Bacterial Content:

< 50 KBE/ml

< 10 KBE/ml

Dimensions W x H x D:

504 x 535 x 340 mm

Weight:

16 to 20 kg

40 kg

Power Connection:

110-230 V/50 Hz

UV Lamp:

optional

Pretreatment Module:

yes

Conditioning Module:

yes

only P10 DI

only EDI² 10 and EDI² 20

RO Module:

yes

Auxiliary Tank:

35 l / 70 l (optional)

optional Configuration for Table integration:

only EDI² 10 and EDI² 20

optional wall mounted Configuration:

only EDI² 10 and EDI² 20

EDI-Cell:

yes

Dispenser:

optional

datasheet_AquaRO-watertreatment-en.pdf (1.6 MiB)

Request more Information about our AquaRO² Pure Water Systems

Go back