Aquinity² E35/70 Water Treatment

Bild Aquinity E35/70 - Wasseraufbereitungsanlage
Pure and Ultrapure Water straight from the tap

The Aquinity2 E35/70 system produces pure and ultrapure water from tap water. With the help of a conditioning module, a reverse osmosis module and an EDI (electrodeionization) is first deionized water or pure water at a production rate of 10 l/h manufactured. This is then stored in an external storage tank (35 l or 70 l), from which can be tapped directly. In the second stage, ultrapure water is produced with downstream mixed-bed cartridges, which is tapped with a flexible dispenser can. To ensure consistently high ultrapure water quality, the water is automatically circulated when no ultrapure water is being drawn from the system.

Configurations and Operation

The Aquinity2 ultrapure water system is available in different configurations for different pure and ultrapure water quality requirements - tailored to the respective applications ( Reagents, Analytics and Life Science). The device is conveniently operated via a color touchscreen, on which recorded data and Warning messages are clearly displayed.

Diagnostics and Maintenance

Thanks to the integrated self-diagnosis module, service times and costs reduced. With the help of the maintenance tool integrated into the software, the customer can easily maintain it himself.

Housing

The specially designed housing contains all components. Only the side panel needs to be removed to carry out maintenance work. This service access allows easy access to the ultra clean module and the UV lamp.


Integrated conditioning, reverse osmosis and EDI module

The integrated modules for conditioning, reverse osmosis and EDI produce deionized water or pure water at a production rate of 10 l/h (optional 20 l/h) from the supplied tap water.

Pure water from the storage tank

The produced pure water or deionized water (DI water) can be tapped directly from the storage tank, which can have a size of 35 L or 70 L.


Ultra pure water through mixed-bed cartridges

The pure water is then routed from the storage tank into a combination of optimized mixed bed cartridges. pure water is produced there from the pure water.

Integrated TOC monitor (TI version)

TOC monitoring for continuous checking of the water for organic components during operation and when not in use


Space-saving thanks to wall mounting

If you order the wall-mounted configuration, you mount the entire system to the wall, saving valuable desk space.

Space-saving through table integration (BI version)

This configuration also saves valuable desk space as the actual system is installed under the desk. Only the display and the dispenser are mounted on the wall.


Space-saving thanks to wall mounting

If you order the wall-mounted configuration, you mount the entire system to the wall, saving valuable desk space.

Space-saving through table integration (BI version)

This configuration also saves valuable desk space as the actual system is installed under the desk. Only the display and the dispenser are mounted on the wall.

Reinstwasser Spezifikationen ASTM Typ I:
  1. Conductivity: 0,055 μS/cm + <0,2 µS/cm
  2. Resistance: 18,2 MΩ x cm + 5 MΩ x cm
  3. Totally Organic Carbon (TOC): < 10ppb Reagent | <5ppb Life Sciences | < 3ppb Analytical
  4. Pyrogens (Endotoxins): 0,001* EU/ml
  5. Bacterial Content: < 1 KbE/ml*
  6. Particle Content: less than 1/ml (> 0,2 μm)
  7. RNAse: < 1 pg/ml*
  8. DNAse: < 5 pg/ml*
Speisewasser Anforderungen:
  1. Type: Tap Water
  2. Conductivity: < 1400 μS/cm
  3. Inlet Pressure: 1,5 bis 6 bar
  4. Free Chlorine: < 0,1 mg/l
  5. Silt Density Index(SDI): <3
  6. pH-Range: 3-9
  7. Temperature: 5 bis 25 °C
Geräte Spezifikationen:
  1. Dimensions Device W x H x D: 504 x 535 x 680 mm
  2. Power Connection: 110-230 V/50 Hz
  3. Dosing Flow: 2,0 l/min (1,5 l/min*)
  4. Productivity Rate: 10 l/h, optional 20 l/h
  5. UV Lamp: 185 nm / 254 nm
  6. Final Filter: Capsule 0,2 µm
  7. Pretreatment ModuleProPak R10
  8. Conditioning Module P
  9. Ultrapure Module MemPak
  10. Ultrafiltration Module

* with Life-Science-Model

Matched to your desired requirements, the Aquinity2 P35/70 water treatment is available in the following < strong>Configurations available:

Configuration
UV Reactor
UF Module
TOC Monitoring
20 l/h
Reagent
 
 
 
 
Analytic
+
 
 
 
Life Science
+
+
 
 
Analytic TI
+
 
+
+
Life Science TI
+
+
+
+
 

Request more Information about our Aquinity² E35/70 Ultrapure Water Systems

All fields marked with * are required for further processing of your request and must be filled out.

I agree that my details from the contact form will be collected and processed to answer my request. The data will be deleted after your request has been processed. You can revoke your consent at any time for the future by sending an email to info@hartmann-gmbh.eu. Detailed information on handling user data can be found in our Privacy Policy.

What is the sum of 1 and 3?

Go back